KARITO ER70S-6 – MIG WELDING WIRE
CLASSIFICATION & CODING:
- IS 6419:1996 (Amendment No. 2 – Jan 2025): S4 C 504
- Size: 0.80 mm
Key Features:
- Copper-coated solid wire for GMAW welding of carbon and low alloy steels.
- Excellent arc stability and smooth metal transfer.
- Low spatter, clean welds with superior finish.
- Smooth, consistent wire feedability for higher productivity.
- Suitable for DC (EN) / DCEP polarity, single & multi-pass welding.
APPLICATIONS:
Used for a wide range of fabrication and repair works including:
- Structural Fabrication
- Automobile Components
- Sheet Metal Fabrication
- General Engineering
- Heavy Equipment Manufacturing
- Pipeline & Pressure Vessels
CHEMICAL COMPOSITION (Typical, % by weight):
C
0.10
Mn
1.55
Si
0.81
S
0.013
P
0.023
Cr
0.017
Cu
0.07
MECHANICAL PROPERTIES (Typical values, NTH-tested):
Property
Value
Yield Strength (0.2% offset)
476.82 MPa (Requirement: ≥ 400 MPa)
Ultimate Tensile Strength
576.38 MPa (Requirement: ≥ 490 MPa)
Elongation %
26.46% (Requirement: ≥ 22%)
CVN Impact (All Weld Metal at -30°C)
70.66 Joules (Requirement: ≥ 27 J)
Result: PASS — Tested & certified by National Test House (Government of India). Certificate No. NTH(NR)/NDT/26/20504, ULR No. TC687026900001076F, dated 13 March 2026.
SIZE & PACKAGING:
Parameter
Value
Available Size
0.80 mm
Packaging
15 kg Spool
Recommended Polarity
DC (EN) / DCEP
Contact Karito
- G10, Krishna Complex, Maharaja Agrasen Marg, Sector-31, Noida, Uttar Pradesh 201301
- support@karito.co.in
- +91 9599 116 787